Difference between revisions of "Network Switcher setup - Broadcast Tools SS 8.2"
From Rivendell Wiki
(Created page with "<pre> Charles Sagona told me on 05/01/2007 08:21 AM: > I need some advice on setting up a Broadcast Tools SS 8.2 switcher… the > switcher is already wired so I need info abo...")
Latest revision as of 15:17, 21 February 2018
Charles Sagona told me on 05/01/2007 08:21 AM: > I need some advice on setting up a Broadcast Tools SS 8.2 switcher… the > switcher is already wired so I need info about the RD side of it. We > carry network programming such as talk shows and music that come down > from a satellite. > Date: Tue, 01 May 2007 08:54:49 -0500 From: Michael Barnes Subject: Re: [RDD] Help with Network Switcher To: User discussion about the Rivendell Radio Automation System <email@example.com> RDAdmin > Manage Hosts > <host>/Edit > Switchers/GPIO > Add > Select Broadcast Tools SS 8.2 from pulldown > OK Fill in the description as desired. Select the proper serial port (com1=serial0, com2=serial1...). Edit the input and output labels as desired under the Configure Inputs and Configure Outputs buttons. Note when you clicked on the ADD button, it assigned the next available matrix number. This number will show in the switcher list when you are done. Now go to RDLibrary and create some Macro carts. A command like this ST 0 4 1! will switch matrix 0 input 4 to output 1. Your matrix number may be different. Since you are asking these questions, I'll assume you have not set any switchers up yet, so the default matrix number will be '0'. Then put these macro carts in your log and you are all set. HTH, Michael